unisonic technologies co., ltd 2n7000z power mosfet www.unisonic.com.tw 1 of 3 copyright ? 2011 unisonic technologies co., ltd. qw-r502-535.a 115m amps, 60 volts n-channel enhancement mode mosfet ? description the utc 2n7000z has been designed to minimize on-state resistance to provide rugged, reliable, and fast switching performance. it can be used in most applications requiring up to 400ma dc and can deliver pulsed currents up to 2a. the product is particularly suited for low voltage, low current applications, such as small servo motor control, powe r mosfet gate drivers and other switching applications ? features *high density cell design for low r ds(on) *voltage controlled small signal switch *rugged and reliable *high saturation current capability ? symbol 2.gate 1.sourc e 3.drai n to-92 1 ? ordering information ordering number pin assignment lead free halogen free package 1 2 3 packing 2N7000ZL-T92-B 2n7000zg-t92-b to-92 s g d tape box 2n7000zl-t92-k 2n7000zg-t92-k to-92 s g d bulk 2n7000zl-t92-r 2n7000zg-t92-r to-92 s g d tape reel note: pin assignment: g: gate d: drain s: source
2n7000z power mosfet unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r502-535.a ? absolute maximum ratings ( ta=25 c ) parameter symbol ratings unit drain-source voltage v dss 60 v drain-gate voltage (r gs 1m ? ) v dgr 60 v continuous 20 v gate -source voltage non repetitive (tp<50 s) v gs 40 v continuous 115 ma maximum drain current pulsed i d 800 ma maximum power dissipation derated above 25 c p d 400 3.2 mw mw/ c operating and stor age temperature t j, t stg -55 ~ +150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functiona l device operation is not implied. ? thermal data parameter symbol ratings unit junction to ambient ja 312.5 c/w ? electrical characteristics (ta =25 c, unless otherwise specified) parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss v gs =0v,i d =10 a 60 v 1 a drain-source leakage current i dss v ds =60v, v gs =0v t j =125 c 0.5 ma gate-body leakage, forward i gssf v gs =20v, v ds =0v 10 a gate-body leakage reverse i gssr v gs =-20v, v ds =0v -10 a on characteristics (note) gate threshold voltage v gs(th) v ds =v gs , i d =250 a 1 2.1 2.5 v v gs =10v, i d =500ma t j =100 c 1.2 1.7 7.5 13.5 static drain-source on-resistance r ds(on) v gs =5.0v, i d =50ma t j =100 c 1.7 2.4 7.5 13.5 v gs = 10v, i d =500ma 0.6 3.75 drain-source on-voltage v ds(on) v gs = 5.0v, i d =50ma 0.09 1.5 v on-state drain current i d(on) v gs =10v, v ds 2v R ds(on) 500 2700 ma dynamic characteristics input capacitance c iss 20 50 pf output capacitance c oss 11 25 pf reverse transfer capacitance c rss v ds =25v,v gs =0v, f=1.0mhz 4 5 pf turn-on time t on v dd =30v, r l =150 ? , i d =200ma, v gs =10v, r gen =25 ? 20 ns turn-off time t off v dd =30v, r l =150 ? , i d =200ma, v gs =10v, r gen =25 ? 20 ns drain-source diode characteristics and maximum ratings drain-source diode forward voltage v sd v gs =0v, is=115ma(note ) 0.88 1.5 v maximum continuous drain-source diode forward current is 115 ma maximum pulsed drain-source diode forward current i sm 0.8 a note: pulse test: pulse width 300 s, duty cycle 2.0%
2n7000z power mosfet unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r502-535.a ? typical characteristics v gs r gen v dd v in r l v out dut g d s switching waveforms pulse width input ,v in output ,v out t on t off t d(off) t r t d(on) t f inverted 10% 10% 10% 50% 50% 90% 90% 90% utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
